Parts
Nine parts, nine different reasons they were hard.
Photographed as they left inspection. Customer names are withheld under our supply agreements, but the material, the tolerance and the batch size are as machined.
Hydraulic manifold
Turbine bearing housing
Ground spindle shaft
Wire-cut punch set
Surgical instrument jaw
Brake caliper prototype
Rail coupling pin
Weld fixture, chassis
Vacuum chamber flange
On the floor
Two shifts, then the lights go off and the pallets keep going.
The pallet pool runs unattended from 22:00, which is where the price on a repeat batch comes down. Setters load the next day's work before they leave, and the first-off is waiting on the inspection bench in the morning.
Sec. 01 / Tolerance
Check your drawing against the shop.
Set the tightest tolerance on your part and see which department would take it.
± 0.020 mm20 µm
- 2 µmWhat we hold on the grinders
- 8 µmTypical 5-axis milled feature
- 70 µmA human hair
- 100 µmA sheet of copier paper
Standard machining, first-off measured.
Send us the part that nobody else will quote.
Quotations in 24 hours · Standard lead time 10 working days